3 k plain light Carbon Fiber Telescopic pipe, twill carbon fiber casing.

Information

Name: custom type conical telescopic rod
Diameter: according to customer's requirement
Appearance: 3 k woven grain/color
Product attributes
Products for: 3 ~ 5 day (can be produced according to customer requirements)
Production process: roll tube
Product specification
According to the customer request production
Product category
1. 100% carbon fiber
2. 100% glass fiber

Specification

Application field

Carbon fiber can be processed into fabric, mat, mat, tape, paper and other materials.In the traditional use

of carbon fiber in addition to the used as insulation materials, is generally not used alone, much as

reinforced material added to the resin, the material such as metals, ceramics, concrete, composite

materials.Carbon fiber reinforced composite material can be used for aircraft structure materials,

electromagnetic shielding in addition to the body, such as electric materials, artificial ligament substitute

material and used in the manufacture of rocket shell, powerboat, industrial robots, automobile plate

spring and the drive shaft, etc.From 1994 to 2002 years or so, as long from tow carbon fiber to fiber

carbon fiber of academic research, the use of carbon fiber heating material technology and products

also gradually entered the military and civilian fields.Now the domestic use of long fiber carbon fiber has

been making more than national grid cable use cases.At the same time, carbon fiber heating products,

carbon fiber heating products, carbon fiber far infrared physical therapy products is also more and more

Into the ordinary people family.Carbon fiber is a new material, dual-use belongs to technology-intensive and the key of politically sensitive material.Ago, coordinating committee headed by the United

States (COCOM), for the embargo on the main meaning of the society at that time the national blockade,

in March 1994, although COCOM has disbanded, but, over the embargo blockade is still shrouded in the

shadow of the advanced carbon fiber technology is still not come in, especially the high performance

PAN strand technology, even if China's entry into the WTO, the situation will not happen big changes.

Therefore, in addition to americans continue to self-reliance development of carbon fiber industry, there

is no other choice.

Display

Shanghai Lijin focuses on the Carbon Fiber industry and offers carbon fiber tubes, plates, and aluminum CNC services.

Being experienced in the carbon fiber applications for over 7 years, Shanghai Lijin manages customized production according to various industry standards. Shanghai Lijin started to keep in stock for some standard

sized and frequently ordered tubes and plates. This enables Shanghai Lijin to make prompt delivery. Not only

can Shanghai Lijin complete mass production orders in short period, we can even ship normal sample, prototype orders of Carbon Fiber Plate CNC parts in just SEVEN days after order confirmation when the

drawings are available. Shanghai Lijin is dedicated to solve any technical points during the production and new item developing to ensure the quality.

Carbon Fiber tube production is Shanghai Lijin’s core business and occupies 70% of our turnover.
The carbon fiber tubes Shanghai Lijin mainly produce is table-rolled and oven thermoset. The tubes can be Full Carbon or Carbon Fiber and Fiberglass composite, depending on the application, weight limit,mechanical

strength and surface requirement.Shanghai Lijin offers top quality ROUND carbon fiber tubes. The general OD tolerance we achieve is +/-0.10mm and it can be even +/-0.05mm after our special surface process.

The maximum length of the tube can be 5500mm.

Besides the traditional table-rolled carbon fiber tubes, Shanghai Lijin also offers REAL Filament wound carbon fiber tubes,which are widely used for mechanical strength like auto driving shaft, antennas, even for military

applications. The filament wound carbon tubes are wound at a certain angle like 30 or 45 degree. We invested the new production line from Jun 2013 and this increases Shanghai Lijin’s advantage in the carbon

fiber tube industry. There are just a few real filament wound carbon fiber tube manufacturers in domestic

China and we are one of them.
 

Since the rapid growth of UAV in the international market, instead of the standard plane like Phantom from DJI, RC fans are getting more interested in the customized multicopters. As carbon fiber is the most preferred

material for UAV, Carbon Fiber CNC parts demand is increasing. Shanghai Lijin sticks to offering OEM service for the international market, fine quality and prompt delivery.To ensure the thickness tolerance +/-0.10mm and minimum warp of the Carbon Fiber plates that are used for the cutting, Shanghai lijin execute high standard to

the plate production. For the normal thicknesses including 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm,
Shanghai Lijin keeps regular stock, to make sure the raw material will be available for cutting immediately when order is firmed.Experienced engineers are in Shanghai Lijin’s office ready to deal with different types of

drawings from customers. No matter the drawing formats are .DWG, .DXF that can be edited by AutoCAD

and used directly for production, 3D drawings like .IGS, or even draft drawings, our staff can do adjustment and change to customer’s idea. Our engineers are also good at English communication, Email and IM is easy

for them. Editing drawings for customers is FREE* of charge. Shanghai Lijin is having several professional CNC machines for carbon fiber cutting and drilling, with the capacity of cutting 20-50pcs standard full sized plate per day. The carbon fiber chassis general cutting tolerance Shanghai Lijin offer is +/-0.02mm. The

special designed cutting solution ensures the smoothness of the cutting edge.

‘Customers’ Persuit for Change, Lijin’s Motivation for Growth’, Shanghai Lijin takes customers’ demand for center, enhances the
customer satisfaction, and grows with customer.