100% 3K Weave Carbon Fiber Tube Pipe Custom Logo Sizes and Colors

Carbon fibre or Carbon fibre is also sometimes called graphite fibre. It has the highest compressive strength of all the reinforcing materials (composites), and it has a high strength-to-weight ratio and low coefficient of thermal expansion. The density of carbon fibre is also much lower than the density of steel. Carbon fibre is in the form of several thousand long, thin strands of material that are composed of mostly carbon atoms.

It has many applications in aerospace and automotive fields, as well as in sailboats, and notably in modern bicycles and motorcycles, where these qualities are of importance. It is becoming increasingly common in small consumer goods as well, such as laptop computers, tripods, fishing rods, paintball equipment, racquet sports frames, stringed instrument bodies, classical guitar strings, and drum shells.

In the arts, craft and design industries, it is often used in costume design, scale model making, jewellery making, stationery, furniture design and other product design applications.

We developed the Power Tubes series for particularly demanding applications when extreme forces have to be transmitted and maximum precision is still required. The Power Tubes are our strongest tubes, manufactured to our precision tube standard. Due to their precision cut, these tubes fit together perfectly and can therefore be optimally extended. The Power Tube system thus offers the perfect balance between maximum power transmission and low weight - without compromise.

The tubes have a particularly attractive carbon design finish in order to meet the highest visual demands. Both the inner layers and the outer layers are made of twill carbon fabric. High-strength carbon fibers are used as core layers in the longitudinal direction in order to achieve maximum flexural strength.

With precisely matched diameters, the Power Tube series is the ideal complement to the Telescopic Tube series. Due to their identical surface finish with the same design, these tubes can also be perfectly combined visually.

Shanghai Lijin focuses on the Carbon Fiber industry and offers carbon fiber tubes, plates, and aluminum CNC services.

Being experienced in the carbon fiber applications for over 7 years, Shanghai Lijin manages customized production according to various industry standards. Shanghai Lijin started to keep in stock for some standard

sized and frequently ordered tubes and plates. This enables Shanghai Lijin to make prompt delivery. Not only

can Shanghai Lijin complete mass production orders in short period, we can even ship normal sample, prototype orders of Carbon Fiber Plate CNC parts in just SEVEN days after order confirmation when the

drawings are available. Shanghai Lijin is dedicated to solve any technical points during the production and new item developing to ensure the quality.

Carbon Fiber tube production is Shanghai Lijin’s core business and occupies 70% of our turnover.
The carbon fiber tubes Shanghai Lijin mainly produce is table-rolled and oven thermoset. The tubes can be Full Carbon or Carbon Fiber and Fiberglass composite, depending on the application, weight limit,mechanical

strength and surface requirement.Shanghai Lijin offers top quality ROUND carbon fiber tubes. The general OD tolerance we achieve is +/-0.10mm and it can be even +/-0.05mm after our special surface process.

The maximum length of the tube can be 5500mm.

Besides the traditional table-rolled carbon fiber tubes, Shanghai Lijin also offers REAL Filament wound carbon fiber tubes,which are widely used for mechanical strength like auto driving shaft, antennas, even for military

applications. The filament wound carbon tubes are wound at a certain angle like 30 or 45 degree. We invested the new production line from Jun 2013 and this increases Shanghai Lijin’s advantage in the carbon

fiber tube industry. There are just a few real filament wound carbon fiber tube manufacturers in domestic

China and we are one of them.
 

Since the rapid growth of UAV in the international market, instead of the standard plane like Phantom from DJI, RC fans are getting more interested in the customized multicopters. As carbon fiber is the most preferred

material for UAV, Carbon Fiber CNC parts demand is increasing. Shanghai Lijin sticks to offering OEM service for the international market, fine quality and prompt delivery.To ensure the thickness tolerance +/-0.10mm and minimum warp of the Carbon Fiber plates that are used for the cutting, Shanghai lijin execute high standard to

the plate production. For the normal thicknesses including 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm,
Shanghai Lijin keeps regular stock, to make sure the raw material will be available for cutting immediately when order is firmed.Experienced engineers are in Shanghai Lijin’s office ready to deal with different types of

drawings from customers. No matter the drawing formats are .DWG, .DXF that can be edited by AutoCAD

and used directly for production, 3D drawings like .IGS, or even draft drawings, our staff can do adjustment and change to customer’s idea. Our engineers are also good at English communication, Email and IM is easy

for them. Editing drawings for customers is FREE* of charge. Shanghai Lijin is having several professional CNC machines for carbon fiber cutting and drilling, with the capacity of cutting 20-50pcs standard full sized plate per day. The carbon fiber chassis general cutting tolerance Shanghai Lijin offer is +/-0.02mm. The

special designed cutting solution ensures the smoothness of the cutting edge.

‘Customers’ Persuit for Change, Lijin’s Motivation for Growth’, Shanghai Lijin takes customers’ demand for center, enhances the
customer satisfaction, and grows with customer.