Strong Corrosion Resistance 50mm (47mm) Woven Finish Carbon Fibre Tube

A 50mm Carbon Fiber Tube is a tube made of carbon fiber composite material, with a diameter of 50 millimeters (mm) and a length that varies depending on the application it is designed for.

Carbon Fiber Tubes are typically formed by wrapping continuous carbon fibers around a mandrel and then curing them with a resin. This manufacturing process creates a material that is light, strong, and stiff. They have a high strength-to-weight ratio and are commonly used in a variety of industries where weight reduction and strength are critical design factors.

50mm Carbon Fiber Tubes are commonly used in industrial applications, such as robotics and other machines that require lightweight but strong components. They are also used in the manufacturing of sporting goods such as fishing rods, golf shafts, and bicycle frames, as well as in aircraft and aerospace industries, where their high strength and stiffness are particularly useful.

The length of 50mm Carbon Fiber Tubes can vary, as they are often used in custom applications that require specific lengths. They typically come with different types of finishes, such as gloss or matte, and can be cut to their respective length using specialized tools.

We supply carbon fiber tubes and carbon fiber conical tubes in various of specifications and colors.

The main benefits of carbon fiber over typically used metal tubing are as follows:

• Light Weight(low density)
• High Strength
• High Stiffness
• Chemical Resistant
• Low Coefficient of Thermal Expansion
• Good Surface

LIJIN manufactures custom carbon fiber tubes and carbon fiber conical tubes to fit your strength, stiffness, and geometric requirements. Our products can be used as fishing poles, paddles, arrow shafts, alpenstocks, etc.

The regular color is black. And other colors are also available by special request. To get more information or have an inquiry, please feel free to contact us.

The first use of carbon fiber in high performance goes back to 1960-1970. It became popular very quickly in every technical area where lightness and strength were primary requirements.

Carbon fiber originates from thermal pyrolysis in a controlled oven where a material called precursor is strongly warmed up at a temperature of about 2000° C in an inert gas atmosphere to produce graphite.

Then other heat treatments modify the final properties of the fibers, for example warming up at temperatures lower than 2000°C gives you a more strength material, whereas with higher temperatures you'll get a more expensive carbon fiber but with a higher Elastic Modulus (Young's modulus).

This is why today there are many kinds of carbon fibers that, even if they're similar, leads to products with different prices and performances.

The carbon fibers previously obtained are lately drowned in epoxy resin (called the matrix) that acts as a binder, allowing the fibers to work together and to distribute the strain uniformly to each one of them.

As you can guess this matrix has a primary role and it has been studied and improved in the last years, like the nanocomposite fillers inside of it.

Shanghai Lijin focuses on the Carbon Fiber industry and offers carbon fiber tubes, plates, and aluminum CNC services.

Being experienced in the carbon fiber applications for over 7 years, Shanghai Lijin manages customized production according to various industry standards. Shanghai Lijin started to keep in stock for some standard

sized and frequently ordered tubes and plates. This enables Shanghai Lijin to make prompt delivery. Not only

can Shanghai Lijin complete mass production orders in short period, we can even ship normal sample, prototype orders of Carbon Fiber Plate CNC parts in just SEVEN days after order confirmation when the

drawings are available. Shanghai Lijin is dedicated to solve any technical points during the production and new item developing to ensure the quality.

Carbon Fiber tube production is Shanghai Lijin’s core business and occupies 70% of our turnover.
The carbon fiber tubes Shanghai Lijin mainly produce is table-rolled and oven thermoset. The tubes can be Full Carbon or Carbon Fiber and Fiberglass composite, depending on the application, weight limit,mechanical

strength and surface requirement.Shanghai Lijin offers top quality ROUND carbon fiber tubes. The general OD tolerance we achieve is +/-0.10mm and it can be even +/-0.05mm after our special surface process.

The maximum length of the tube can be 5500mm.

Besides the traditional table-rolled carbon fiber tubes, Shanghai Lijin also offers REAL Filament wound carbon fiber tubes,which are widely used for mechanical strength like auto driving shaft, antennas, even for military

applications. The filament wound carbon tubes are wound at a certain angle like 30 or 45 degree. We invested the new production line from Jun 2013 and this increases Shanghai Lijin’s advantage in the carbon

fiber tube industry. There are just a few real filament wound carbon fiber tube manufacturers in domestic

China and we are one of them.
 

Since the rapid growth of UAV in the international market, instead of the standard plane like Phantom from DJI, RC fans are getting more interested in the customized multicopters. As carbon fiber is the most preferred

material for UAV, Carbon Fiber CNC parts demand is increasing. Shanghai Lijin sticks to offering OEM service for the international market, fine quality and prompt delivery.To ensure the thickness tolerance +/-0.10mm and minimum warp of the Carbon Fiber plates that are used for the cutting, Shanghai lijin execute high standard to

the plate production. For the normal thicknesses including 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm,
Shanghai Lijin keeps regular stock, to make sure the raw material will be available for cutting immediately when order is firmed.Experienced engineers are in Shanghai Lijin’s office ready to deal with different types of

drawings from customers. No matter the drawing formats are .DWG, .DXF that can be edited by AutoCAD

and used directly for production, 3D drawings like .IGS, or even draft drawings, our staff can do adjustment and change to customer’s idea. Our engineers are also good at English communication, Email and IM is easy

for them. Editing drawings for customers is FREE* of charge. Shanghai Lijin is having several professional CNC machines for carbon fiber cutting and drilling, with the capacity of cutting 20-50pcs standard full sized plate per day. The carbon fiber chassis general cutting tolerance Shanghai Lijin offer is +/-0.02mm. The

special designed cutting solution ensures the smoothness of the cutting edge.

‘Customers’ Persuit for Change, Lijin’s Motivation for Growth’, Shanghai Lijin takes customers’ demand for center, enhances the
customer satisfaction, and grows with customer.