Corrosion Resistance Flexibility Carbon Fiber TUBE 14mm x 12mm x 1000mm

These pultruded Carbon Fiber TUBES are great for reinforcing models or other arts and crafts. Use them in the wings, fuselage, or other parts of the model.

These tubes are comprised of carbon fiber braid and unidirectional fabrics. This product is ideal for building lightweight frames and structures such as trusses. Our carbon fiber tubes have been engineered to be much stronger under torsional and side loading than pultruded tubing. They're also significantly lighter than pultruded tubing. Also the product unidirectional layers are captured, eliminating longitudinal cracking and splitting. The finish on this product is different from other product lines. These Carbon fiber tube show the texture of the carbon fiber braid with a wet and shiny appearance.

Do not see exactly what you’re looking for? Contact us about custom thicknesses, sizes, and finished lengths. Users are responsible for the design and test of any structures involving Carbon Fiber Tube and gussets and are responsible for determining the safety and suitability of these products for their own purposes.

Roll wrapped Carbon fiber tube (Tubing) is manufactured using multiple layers of prepreg carbon fiber (and if noted, other) materials. In general each layer is about 0.005 inches (0.12mm-0.15mm) thick which means that a Carbon fiber tube with a wall thickness of 0.050 inches will typically be composed of 9-10 individual layers of carbon fiber. The number of layers (plys) allows us to vary the orientation of the fibers throughout the thickness, creating a high performance, engineered product.

Features:

• Material — 100% Carbon Fiber Hollow Tube. High strength, corrosion resistance, surface smoothness, straightness good, stable performance.
• Dimension — Length: 500mm/20inch. Multiple Different sizes for you to choosefrom, Outside diameter: 3mm;Inner diameter : 1mm, 1.5mm, 2mm.
• Features — Carbon Fiber Pultruded Hollow Tube has a good heat resistance and electrical conductivity, corrosion, rubbing performance. Carbon Fiber is perfect for construction that requires great strength without excess weight.
• Surface — High-quality carbon fiber round tube Good Crushability, High tensile strength: Carbon fiber rods are much less weight than stainless steel and incredibly rigid, the strength of the carbon fibre 6 to 12 times that of steel.
• Application — Pure Carbon Fiber, widely used in stunt kites, robotics, aviation model plane and Helicopter, the light axis with stents, PC equipment and RC Quadcopter, sports equipment and other mechanical equipment.

What are the uses of carbon fiber tubes?

Carbon fiber has various excellent properties of elemental carbon, such as low specific gravity, excellent heat resistance, low coefficient of thermal expansion, high thermal conductivity, good corrosion resistance and conductivity. At the same time, it has the flexibility of fiber, which can be used for weaving and winding.

The most excellent performance of carbon fiber is that its specific strength and specific modulus are higher than that of ordinary reinforced fiber. The specific strength and specific modulus of the composite formed by carbon fiber and resin are about three times higher than that of steel and aluminum alloy. Carbon fiber composite pipes are widely used in many fields, which can significantly reduce the weight, improve the payload and performance. They are important structural materials in aerospace industry.

1. Aerospace

Carbon fiber composites have long been used in satellite structures, solar panels and antennas due to their advantages of light weight, high rigidity, high strength, stable size and good thermal conductivity. Nowadays, most of the deployable solar cells on artificial satellites are made of carbon fiber composite materials, and some key parts of space station and space transportation system are also made of carbon fiber composite materials.

Carbon fiber tube is also very good in UAV applications. In practical applications, it can be applied to different parts of UAV body, such as arm, frame and so on. Compared with aluminum alloy, the application of carbon fiber tube in UAV can reduce weight by about 30%, which can improve the load capacity and endurance of UAV. Carbon fiber tube has the advantages of high tensile strength, corrosion resistance and good anti-seismic effect, which can effectively guarantee the life of UAV.

2. Mechanical equipment

Application of carbon fiber composite material in robot end picker the end picker is a kind of fixture used in the transmission process of stamping production line. It is installed on the loading and unloading robot of the press, and drives the end picker to carry the workpiece through trajectory teaching. Among many new materials, carbon fiber composite is the most popular.

The proportion of carbon fiber composite is less than 1 / 4 of that of steel, but its strength is several times of that of steel. The robot end pickup made of carbon fiber composite can reduce the shaking and self burden when handling Automobile parts, and its stability can be greatly improved.

3. Military industry

Carbon fiber has the characteristics of light weight, high strength, high modulus, corrosion resistance, fatigue resistance, high temperature resistance, thermal conductivity, good heat dissipation and low coefficient of thermal expansion. Carbon fiber and its composites are widely used in rocket, missile, military aircraft, personal protection and other military fields, and the amount is increasing with each passing day, which makes the performance of military equipment improve continuously. Carbon fiber and its composites have become important strategic materials for the development of modern defense and military weapons.

In terms of military rockets and missiles, the excellent performance of carbon fiber composite materials has also been better applied and developed, such as "Pegasus", "delta" carrier rocket, "Trident II (D5)," dwarf "missile, etc. carbon fiber composite materials are used; while the U.S. strategic missile MX intercontinental missile, Russian strategic missile" poplar "M Missiles also use advanced composite launchers.

4. Sporting goods

Most of the traditional sports products are made of wood, but the mechanical properties of carbon fiber reinforced composites are much higher than that of wood. The specific strength and specific modulus of carbon fiber reinforced composites are 4 times and 3 times that of Chinese fir, 3.4 times and 4.4 times that of Wutong wood. Therefore, it has been widely used in sports goods, and its consumption accounts for about 40% of the total consumption of carbon fiber in the world. In the field of sporting goods, carbon fiber pipes are mainly used in the following aspects: golf clubs, fishing poles, tennis rackets, badminton rackets, ice hockey clubs, bows and arrows, sailing masts, etc.

Taking the tennis racket as an example, the tennis racket made of carbon fiber composite material is light and strong, with large rigidity and small strain, which can reduce the deviation when the ball is in contact with the racket; at the same time, the CFRP has good damping property, which can extend the contact time between the gut and the ball, so that the tennis ball can obtain greater acceleration. For example, the contact time of wooden racket is 4.33 MS, that of steel product is 4.09 MS, and that of CFRP is 4.66 Ms. the corresponding initial velocity of the ball is 1.38 km / h, 149.6 km / h and 157.4 km / h respectively.

In addition to the above fields, carbon fiber composites are also widely used in rail transit, wind power, medical devices and other fields. With the continuous breakthrough of carbon fiber raw material manufacturing and subsequent processing technology, the price of carbon fiber raw materials is expected to become more people-friendly.

Shanghai Lijin focuses on the Carbon Fiber industry and offers carbon fiber tubes, plates, and aluminum CNC services.

Being experienced in the carbon fiber applications for over 7 years, Shanghai Lijin manages customized production according to various industry standards. Shanghai Lijin started to keep in stock for some standard

sized and frequently ordered tubes and plates. This enables Shanghai Lijin to make prompt delivery. Not only

can Shanghai Lijin complete mass production orders in short period, we can even ship normal sample, prototype orders of Carbon Fiber Plate CNC parts in just SEVEN days after order confirmation when the

drawings are available. Shanghai Lijin is dedicated to solve any technical points during the production and new item developing to ensure the quality.

Carbon Fiber tube production is Shanghai Lijin’s core business and occupies 70% of our turnover.
The carbon fiber tubes Shanghai Lijin mainly produce is table-rolled and oven thermoset. The tubes can be Full Carbon or Carbon Fiber and Fiberglass composite, depending on the application, weight limit,mechanical

strength and surface requirement.Shanghai Lijin offers top quality ROUND carbon fiber tubes. The general OD tolerance we achieve is +/-0.10mm and it can be even +/-0.05mm after our special surface process.

The maximum length of the tube can be 5500mm.

Besides the traditional table-rolled carbon fiber tubes, Shanghai Lijin also offers REAL Filament wound carbon fiber tubes,which are widely used for mechanical strength like auto driving shaft, antennas, even for military

applications. The filament wound carbon tubes are wound at a certain angle like 30 or 45 degree. We invested the new production line from Jun 2013 and this increases Shanghai Lijin’s advantage in the carbon

fiber tube industry. There are just a few real filament wound carbon fiber tube manufacturers in domestic

China and we are one of them.
 

Since the rapid growth of UAV in the international market, instead of the standard plane like Phantom from DJI, RC fans are getting more interested in the customized multicopters. As carbon fiber is the most preferred

material for UAV, Carbon Fiber CNC parts demand is increasing. Shanghai Lijin sticks to offering OEM service for the international market, fine quality and prompt delivery.To ensure the thickness tolerance +/-0.10mm and minimum warp of the Carbon Fiber plates that are used for the cutting, Shanghai lijin execute high standard to

the plate production. For the normal thicknesses including 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm,
Shanghai Lijin keeps regular stock, to make sure the raw material will be available for cutting immediately when order is firmed.Experienced engineers are in Shanghai Lijin’s office ready to deal with different types of

drawings from customers. No matter the drawing formats are .DWG, .DXF that can be edited by AutoCAD

and used directly for production, 3D drawings like .IGS, or even draft drawings, our staff can do adjustment and change to customer’s idea. Our engineers are also good at English communication, Email and IM is easy

for them. Editing drawings for customers is FREE* of charge. Shanghai Lijin is having several professional CNC machines for carbon fiber cutting and drilling, with the capacity of cutting 20-50pcs standard full sized plate per day. The carbon fiber chassis general cutting tolerance Shanghai Lijin offer is +/-0.02mm. The

special designed cutting solution ensures the smoothness of the cutting edge.

‘Customers’ Persuit for Change, Lijin’s Motivation for Growth’, Shanghai Lijin takes customers’ demand for center, enhances the
customer satisfaction, and grows with customer.